Version 8 · 1 November 2026
RAW development, the hardware check, reliable input
The eighth version is about developing RAW and about the app never letting you down. RAW gets saturation, detail and Rescue for highlights, pixels and colour noise, filters get ray strength, colour correction gets a ring-around, and Zerno checks what it runs on. Truncated and damaged files, a full disk, a dropped connection or quitting mid-export no longer leave grey frames or half-written files.
11 new · 26 fixed · 17 changed
The build is not yet signed by Apple: macOS will stop it the first time you open it. It takes two minutes — how to open it →
01 · New
- Ring-around for colour correction. Next to the Colour correction switch, ⊞ shows the frame as seven tiles in a honeycomb: as is in the middle, six shifts around it — yellower, bluer, more magenta, greener, more cyan, redder — in steps from 1 to 15. Click a tile and the correction is applied, and the ring is rebuilt around the new centre; Esc takes you back to the frame.
- Saturation and RAW detail in SOURCE. A Saturation knob, ±50 % around brightness, before the lens and the film: brightness stays, and black-and-white film changes tone as it would with the scene colour. RAW frames get a two-way Detail knob: above zero it gives back the sharpness the camera’s filter and demosaicing took, below zero it calms the digital ringing of fine detail — without halos and without touching colour; with a JPEG the camera has already decided.
- Libraries open with a double-click. Double-click a
.zernoliblibrary in Finder and Zerno opens exactly that one, even if another is open. File → Library › Recent lists the last twenty libraries, so switching between them is one menu item; the list can be cleared. - Ray strength. Star filters and the anamorphic streak get a Ray strength knob, from zero to double. Gentler — the rays are barely there; stronger — they are bright and the light source itself dims: the filter does not add light, it redistributes it.
- Rescue for RAW. In SOURCE, RAW frames get a Rescue fold, closed until you open it: Dead / hot pixels removes the dots of long exposures without touching stars and fine detail; Colour noise reduction calms the colour blotches of high ISO while the brightness and the grain stay put; Highlight rescue gently pulls down the two brightest stops — a plateau of clipped sky darkens, texture appears at its edge, the colour stays. Everything is off by default; a closed fold shows on the right what is on. RAW sharpening is now called Detail.
- Grain only — no film. The No film section of the film picker now holds more than the neutral film: Grain only (colour) and Grain only (B&W) touch neither the colour nor the contrast of the source — just grain and halation, with the same exposure, grain and halation knobs. The colour grain comes in three layers, like Portra; the B&W one is a single silver field for all three channels, with no colour blotches.
- “As camera” exposure. For RAW, the middle of the frame can now match the picture the camera made itself: a portrait on a dark background no longer comes out overexposed. As camera is the default for new frames; next to it is the new Auto\* — auto that moves no more than two stops away from the shot. The mode for new frames is chosen in Settings, on the Library page.
- Colour noise up to 300 %. Above 100 % the large colour blotches of high ISO go too, and colour keeps to the edges of brightness instead of spilling over them.
- Lens correction. For RAW, SOURCE has a Lens correction switch: the system itself corrects distortion, vignetting and colour fringing if it knows this camera and lens; where it does not, there is no switch. New frames get it switched on — this can be changed in Settings, on the Library page.
- Zerno knows what it runs on. On the first launch on a new computer Zerno tries a real frame render once and, if the machine is below what it needs, says so politely — what exactly is weak and what that means. Zerno → Hardware Report… shows this computer, the test result and recommendations — exactly the details worth sending to support. And if a frame could not be shown, its place holds the reason and advice, not a black rectangle.
- Paper texture across the whole sheet, and four new sorts. The Paper texture picker now has Silk, Laid, Washi and Rough. A new switch, Texture on the margins too (on by default), lays the texture over the margins in one pattern with the photo; turn it off and the margins stay flat. So prints with a texture and margins now have textured margins, older frames included.
02 · Fixed
- Colour-correction proofs no longer hang during continuous slider drags. Replies from older process generations cannot restart the preview queue: the latest tiles appear immediately after a change, and a real render failure shows its reason instead of an endless spinner.
- Material tooltips no longer expose internal notes. Neutral and grain-only films, along with other films, lenses and papers that had long engineering comments, now show a short name or description instead of developer notes.
- An old frame with an incompatible developer opens. If the saved process names a developer that does not fit the film type, Zerno applies the standard process and shows the frame and proofs instead of an error. The developer stored in the file stays untouched; there is no need to reset the process.
- Knob value in one click. Clicking the value puts the cursor in the field with the value selected: digits go to the knob, not to the frame rating.
- The reason for an incomplete export is visible at once. The result line starts with the count and the reason; the folder and names are in the tooltip. If a social copy fails, its master still counts as written.
- The “can't be read” bar is about the current source only. It does not show in a project with no broken frames, and “Remove these frames” leaves other projects alone.
- Texture on reversal paper is applied once. A slide printed on Cibachrome with “Texture on margins too” switched on got the texture twice on the photo, which came out coarser.
- A clock that ran ahead no longer locks the licence. If the computer’s clock once jumped into the future, Zerno remembered that date and treated the licence and the trial as expired even after the clock was set right. Now the first check with the server puts the correct date back.
- The keyboard cheat sheet is wider, no more narrow columns. The “?” card had grown to forty lines while keeping its old width, so the descriptions read as a narrow column several lines tall. Now it is twice as wide, keys have their own column, lines are grouped, and on a small window the card scrolls.
- RAW development knobs respond at once. Detail, Colour noise reduction, Dead / hot pixels and Highlight rescue turn without a pause for redevelopment and no longer pile up a preview on disk for every position; and the preview cache limit raises itself for a large shoot when there is room on the disk.
- The export sheet remembers your last choice. The file name rule, size, format, social copy and folder are the same as last time when the sheet opens again or after a restart, even if it was closed without exporting. Before, the choice jumped to Custom text by itself when the sheet opened.
- Switches no longer stick. “Write the process to files” in Settings and “Don’t show again on this computer” in the hardware window didn’t always switch off on the first click — now they switch at once, and the switch’s label is clickable too.
- A truncated or damaged file is refused, not shown with a grey bottom. JPEG, HEIC, PNG and TIFF files that were not fully downloaded, or damaged in the middle, used to open “whole” — with a grey or black bottom, and HEIC and TIFF sometimes as an all-black frame. Now the tile and DEVELOP say “The file is truncated or not fully downloaded” or “The file is damaged”, the file never reaches the preview cache, and export names it in its report.
- Export never overwrites the original photo. If the export file name matches the photo itself or its copy in another folder, the question has no Replace — only Keep both, and “do the same for the rest” leaves the original alone too.
- Stopping or quitting mid-export leaves no half-written files. A file is written under a temporary name and takes its place only when complete: ✕, quitting the app or running out of space leave only finished files in the folder, and an earlier file with the same name untouched.
- Missing files are looked for in the background. When you come back to Zerno or connect a drive, the window no longer freezes while the app checks frames without a file.
- If the library fails to open, Zerno asks what to do. When a library cannot be opened or its drive is not connected, a window gives the reason: try again, open another or create a new one. The app no longer creates an empty library in place of yours, and there is no empty grid behind that window — for example, when the library is already open in a second copy of Zerno.
- Out of disk space — said in words. If edits could not be written to the library because the disk is full, Zerno says “Not enough space on the library’s disk”, and once there is room again — “Changes saved”.
- “An internet connection is needed” has a Check again button. You can now leave this window without restarting the app: the check runs at once, and when the connection comes back the licence is checked by itself.
- Presets keep everything and leave your profiles alone. A preset with several filters, with press printing or three plates is applied in full; a profile that arrives with someone else’s preset no longer replaces yours of the same name; Apply only… offers just the blocks the preset has; Apply to All… no longer carries another frame’s grain, and the first touch of a knob on an original is one undo step.
- A preset survives renaming and language changes. The frame stores its identifier rather than the name in the language it was applied: renaming keeps the link, and the caption and ↑ ↓ navigation show the preset in the current language. Old projects, libraries and clipboard contents read as before.
- No folder access is not “the file cannot be read”. A system permission refusal now has its own wording and advice to allow access in macOS Settings. Zerno does not offer to remove such a frame as damaged: the file on disk is intact.
- The hardware check no longer confuses slow with failed. On a slow Mac the check waits for the heavy frame and says how long it took, rather than “the check did not run”.
- A frame that could not be rendered says why. In the SELECT filmstrip and in DEVELOP, such a frame shows the reason and advice instead of an endless spinner.
- Export no longer stops at one frame. A frame that could not be written is named in the result, and the rest carry on: “Written 9 of 12”, with what got in the way in words — no permission to write to the folder, no space left on the disk, the file is in use. Export progress and ✕ also show in SELECT without the Process panel.
- The licence is not lost if the state file cannot be read. If the licence state file became unreadable (for example after running with administrator rights), Zerno no longer writes an empty one over it — and if a valid code could not be saved to disk, it says so instead of silently asking for a licence.
03 · Changed
- All six exposure modes on import. New-frame settings now offer As shot, As camera, Auto, Auto*, Highlights and Shadows, in the same order as the rack. The default remains As camera.
- Re-adding a frame brings it back to Recent. An existing frame is not duplicated: the original and its variants get one new shared added-at time while the process, rating, crop, tags and history stay intact. If the file was missing, re-adding by path or fingerprint relinks it at the new location and shows it immediately.
- Datasheet grain removed. The switch is gone from FILM, process summaries, history and new presets. Old processes and presets open with the regular grain: the legacy RMS flag is ignored, all other settings stay put.
- What’s New no longer links to screenshots that do not exist. The update window keeps only the working buttons: Later and Download version N.
- Grain size changes resolution too. Larger grains mean coarser detail: a hair finer than the grain is now built from the grains instead of lying sharp on top of them. Frames where the multiplier isn't 1 become softer at full size.
- The rating filter is one list. Instead of two lists (condition and number) there is one: All · Picks · Not rejected · Rejected · +2 · +3 · +4 · +5, with how many frames match next to it. The same in the layout strip.
- Reset Process on RAW works like a new frame. A RAW frame goes back to Neutral with the exposure and lens correction from Settings, not to the raw look; JPEG and other developed files go back to the original, as before.
- Messages only when something did not work. Successful actions no longer leave a line at the bottom: gone without a message means all is well. A line in the reject colour appears only on failure and goes away with ✕ or when the same action succeeds.
- Built-in presets leave SOURCE alone. Exposure, balance, noise and highlight rescue stay yours; warm presets add only their warmth, night ones their highlight headroom. Your own presets with the SOURCE block work as before.
- The format comes back after glass. If a sheet or 135 frame is switched to wet collodion or a plate and then back to film, the previous format and frame size return.
- Highlight headroom is 0 by default. New JPEG, HEIC, PNG and TIFF frames start with Highlight headroom at zero: on some shots, especially without a film, stretched highlights looked worse. Set it yourself if you need it; frames you have already processed stay as they were.
- The print process is one list with sections. Every film gets a single picker in the PRINTING card, like the film picker: Scan, Printing B&W, Printing colour, Alternative processes, Reproduction, Screen (plus Printing from a slide for slides and the plate for collodion). When you change the film, a process that cannot show it becomes the neutral scan by itself — the picker is never empty.
- Social copy — by platform. In the export sheet the social copy is one row: the Social copy switch and a list of platforms with notes — Feed (Instagram, Threads, TikTok), Pinterest, LinkedIn, X, Large (Facebook, Flickr), Telegram, Bluesky, Website — and Custom… with your own number. For Bluesky the copy shrinks itself under a megabyte.
- The preview cache is about three times smaller. Previews on disk are now compressed without loss, and their colour is stored compactly — to 1/16 stop, with no difference on screen or in export. If you want the old precision, switch off Compact previews on the Memory page of Settings; previews already written stay as they are.
- Neutral film takes the camera’s balance. Neutral film has no balance of its own, so RAW under it develops As shot: the Film position means the camera’s balance, Custom — the camera’s balance plus Temperature and Tint. Real films are as before: tungsten light on daylight film still turns golden.
- H&D curves are internal. The curve graph in the FILM card and the curves panel are gone: they are internal details of the render, and the card is shorter.
- Colour correction without the common part in its label. In the PRINTING card label and in the process written to the file, the part shared by all three axes is no longer listed — it changes brightness, not colour: “Y +20 · M +25 · C +20” now reads “correction · M +5”. The print is the same.
Updates
The program checks for a new version once a day and offers it by itself. How to update by hand and why macOS asks for permission for every build — “How updates work”.