ZERNO.
Windows · Version 8 · 2 November 2026

“As camera”, noise up to 300 %, reliable export

The eighth version for Windows is about RAW exposure that matches the camera and an app that never lets you down. RAW gets an “As camera” mode, colour noise is suppressed up to 300 %, export no longer stops at one frame and leaves no half-written files, and messages appear only when something did not work.

4 new · 33 fixed · 13 changed
The installer is not yet signed: the first time you run it, Windows shows “Windows protected your PC”. Click “More info” → “Run anyway” — what it looks like →
01 · New
  1. “As camera” exposure. For RAW, the middle of the frame can now match the picture the camera made itself: a portrait on a dark background no longer comes out overexposed. As camera is the default for new frames; next to it is the new Auto\* — auto that moves no more than two stops away from the shot. The mode for new frames is chosen in Settings, on the Library page.
  2. Colour noise up to 300 %. Above 100 % the large colour blotches of high ISO go too, and colour keeps to the edges of brightness instead of spilling over them.
  3. Grain size in the rack. In the FILM block, under Grain, there is now a Grain size control: how much larger the grains are than this film's; the loudness stays the same.
  4. Paper texture across the whole sheet, and four new sorts. The Paper texture picker now has Silk, Laid, Washi and Rough. A new switch, Texture on the margins too (on by default), lays the texture over the margins in one pattern with the photo; turn it off and the margins stay flat. So prints with a texture and margins now have textured margins, older frames included.
02 · Fixed
  1. An old frame with an incompatible developer opens. If the saved process names a developer that does not fit the film type, Zerno applies the standard process and shows the frame and proofs instead of an error. The developer stored in the file stays untouched; there is no need to reset the process.
  2. Material tooltips no longer expose internal notes. Neutral and grain-only films, along with other films, lenses and papers that had long engineering comments, now show a short name or description instead of developer notes.
  3. A truncated or damaged file is refused, not shown with a grey bottom. JPEG, HEIC, PNG and TIFF files that were not fully downloaded, or damaged in the middle, used to open “whole” — with a grey or black bottom. Now the tile and DEVELOP say “The file cannot be read”, the file never reaches the preview cache, and export names it in its report.
  4. Export never overwrites the original photo. If the export file name matches the photo itself or its copy in another folder, the question has no Replace — only Keep both, and “do the same for the rest” leaves the original alone too.
  5. Stopping or quitting mid-export leaves no half-written files. A file is written under a temporary name and takes its place only when complete: ✕, quitting the app or running out of space leave only finished files in the folder, and an earlier file with the same name untouched.
  6. Export no longer stops at one frame. A frame that could not be written is named in the result, and the rest carry on: “Written 9 of 12”, with what got in the way in words — no permission to write to the folder, no space left on the disk, the file is in use.
  7. “An internet connection is needed” has a Check again button. You can now leave this window without restarting the app: the check runs at once, and when the connection comes back the licence is checked by itself.
  8. Presets leave your profiles alone. A profile that arrives with someone else’s preset no longer replaces yours of the same name; Apply only… offers just the blocks the preset has; Apply to All… no longer carries another frame’s grain, and the first touch of a knob on an original is one undo step.
  9. A frame that could not be rendered says why. In the SELECT filmstrip and in DEVELOP, such a frame shows the reason and advice instead of an endless spinner.
  10. Flicking through a folder of RAW files no longer drags. The frame you stop at opens first, and the frames you flicked past no longer queue in front of it; the full size of the previous frame does not hold up the next one.
  11. Sony A7R VI photos without black stripes. For a camera the RAW decoder does not know yet, the frame is now cut to the frame recorded in the file itself instead of being handed over whole with the masked edges of the sensor.
  12. A project or a library can be dropped anywhere in the window. A .zerno file dropped on the SELECT grid or on a project or tag row is brought into the library as a project, and a library opens — just as when dropped on the window title; before, it said “Added 0”. A library folder is no longer taken for a folder of photos.
  13. A damaged state file no longer stops the app from starting. If the licence’s own service file is damaged in the middle, the app no longer closes straight after starting — the damaged entry is simply not read.
  14. Failures are no longer lost. If the library backup was not written, restoring from a backup failed, moving projects ended with errors or the graphics card did not come back after a retry, a line in the reject colour now says so; before, the window simply closed without a word.
  15. Preset and proof previews no longer get stuck. If you leave a RAW frame quickly and come back, the preset and proof tiles of that frame finish drawing instead of staying as placeholders until restart.
  16. A graphics reset does not stop an export. If the card resets during an export while the new device waits for the window to let go of the display, the frame is rendered again and the export carries on. After a reset the master size limit is recalculated from the card's memory rather than kept from the old value.
  17. Video memory is called video memory. Running out of card memory now has its own wording, numbers and advice rather than “the graphics card stopped responding”; at startup a card held by a game reads “the graphics card is busy” rather than “this is about the Zerno build”. The canvas and the hardware report now say the same thing about how the card returned the frame: black, broken or flat.
  18. A huge file does not take all the memory. A PNG or TIFF tens of thousands of pixels on a side is answered with “The file is too large” straight away instead of asking for tens of gigabytes.
  19. RAW folders open faster. The camera picture for “As camera” is taken reduced and from the file already read: raising a proxy no longer reads the file twice.
  20. The window does not wait. Closing the window and “Try again” no longer freeze on a frame being computed on the processor, and “Stop” drops the export frame in progress at once instead of waiting for it to finish.
  21. After the beta ends, a code can be entered. The “Beta access ended” window now has a field for an activation code or licence line; before, there was nowhere to paste a code you had been sent.
  22. Library failed to open: a choice, not a new empty one. If the library's drive isn't connected or the file can't be read, Zerno says so and offers to retry, open another, create a new one or go back to a backup. It no longer quietly starts a new library in place of the old one.
  23. An edit isn't lost when it can't be saved. With a full or disconnected drive the step stays in the history and Ctrl+Z works; once saving is possible again, the edit goes into the library. A line at the bottom says so.
  24. Ratings and tags stay quick in a large library. Only the changed frames are written, not the whole library; compacting the database runs in the background and doesn't hold up the window.
  25. RAW folders are added faster. Files are no longer read in full just for their size and shooting details.
  26. Names like CON, PRN and NUL no longer break saving. For a preset or a custom export name, such a name gets a prefix and is written as an ordinary file.
  27. The computer code isn't replaced. If Windows doesn't give it up the first time, Zerno tries again and says the code couldn't be read, rather than treating the computer as new and taking up another licence seat.
  28. More reliable export. A long custom name is now shortened by rule instead of failing the write; files carry an embedded sRGB profile; a frame without a process exports with its capture date, ½ size and social copy; a TIFF sheet over 4 GB is refused straight away; “Same for the rest” works for sheets; the contact sheet no longer waits a minute for a frame without a file and marks it with ⚠︎; the “Start at” counter advances after the graphics-limit question too; preparing a large set no longer stalls the window; reversal paper (Cibachrome, dye transfer) with margins no longer gets its texture twice.
  29. Instant cards and presets. Exporting an integral card no longer leaves black corners: they are white in the file and table-coloured on screen, and the card now casts a shadow. Pasting settings in A/B leaves the frame alone until “Take this one”; a paper the film cannot use falls back to the default and says so; the clipboard now holds a full preset, and the preset menu has “Apply to selected” and “Apply to all”; “+ From this frame…” asks which blocks to include; changing the frame size no longer marks a preset as modified; Esc in the RAW · JPEG question means RAW.
  30. Export report and preview cache. A frame that fails in export names the reason and the advice, and the count in the hardware report is no longer inflated; export progress stays visible with the panels hidden; a damaged preview cache record is recomputed and no longer blocks the frame; a TIFF of an original over 4 GB is refused straight away; the size summary respects the crop; “Apply to frame” in the preset menu now means the frame under the cursor only.
  31. Window and keys. Holding Alt no longer sticks after Alt-Tab and shows the original when comparing variants too; Tab in SELECT no longer cuts off the top row; the download button in About fits the window; the window has our icon in Alt-Tab; “?” and Ctrl+ work on any keyboard; the crop angle moves by 0.01° with Alt; comparing has no rack or footer, and the knock-out cross sits in the corner of the frame; ↑ ↓ in the filmstrip change the rating; a frame tile that failed explains why and offers details; the licence warns in advance with a badge about its end and about long periods offline; an unlink refusal and the reason for an incomplete export are named in their own words.
  32. A frame keeps its preset. A frame remembers the preset itself, not its name: after changing the language or renaming, the “by preset” line and ↑ ↓ still find it; older frames are brought up to date on their own, and the picture does not change.
  33. A file without read permission says so. A frame that Windows will not let Zerno read now says “No access to the folder” with advice on how to allow it, instead of “cannot be read”; Zerno no longer offers to remove such a frame — the file itself is fine.
03 · Changed
  1. All six exposure modes on import. New-frame settings now offer As shot, As camera, Auto, Auto*, Highlights and Shadows, in the same order as the rack. The default remains As camera.
  2. Re-adding a frame brings it back to Recent. An existing frame is not duplicated: the original and its variants get one new shared added-at time while the process, rating, crop, tags and history stay intact. If the file was missing, re-adding by path or fingerprint relinks it at the new location and shows it immediately.
  3. Datasheet grain is gone. The toggle is no longer in the FILM card, the summary, the history or new presets. Older processes and presets open with ordinary grain: the previous RMS flag is ignored while every other setting stays.
  4. What's New no longer links to screenshots that aren't there. The update sheet keeps only its working buttons: Later and Download version N.
  5. The rating filter is one list. Instead of two lists (condition and number) there is one: All · Picks · Not rejected · Rejected · +2 · +3 · +4 · +5, with how many frames match next to it.
  6. Reset Process on RAW works like a new frame. A RAW frame goes back to Neutral with the exposure from Settings, not to the raw look; JPEG and other developed files go back to the original, as before.
  7. Messages only when something did not work. Successful actions no longer leave a line at the bottom: gone without a message means all is well. A line in the reject colour appears only on failure and goes away with ✕ or when the same action succeeds.
  8. Built-in presets leave SOURCE alone. Exposure, balance, noise and highlight rescue stay yours; warm presets add only their warmth, night ones their highlight headroom. Your own presets with the SOURCE block work as before.
  9. The format comes back after glass. If a sheet or 135 frame is switched to wet collodion or a plate and then back to film, the previous format and frame size return.
  10. The crop symbol lights up while crop is open. The crop button on the canvas bar is highlighted also when the tool is open and the frame has not been touched yet — like A|B and Original next to it.
  11. Film rebate by style only. The Rebate width number is gone: the rebate is set by None · Thin · Wide. An old number in a file is not read: with None there is no rebate.
  12. Grain size changes resolution too. Larger grains mean coarser detail: a hair finer than the grain is now built from the grains instead of lying sharp on top of them. Frames where the multiplier isn't 1 become softer at full size.
  13. The master limit is a label over the frame. If a frame is larger than the graphics card can process, a label “Master up to N MP · M GB” appears at the top right in Print; there is none in Select.
Updates

The program checks for a new version once a day and offers it by itself: it downloads the installer, verifies its checksum and shows it in File Explorer. You run it — “How updates work”.